Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin

<div>Degree of conversion (DC%) for 25, 50, and 100 <i>μ</i>m printing layer thicknesses under different treatment conditions: control (dry storage), light curing for 5 minutes (LC 5 min), light curing for 15 minutes (LC 15 min), heat curing for 5 minutes (HC 5 min), and heat curing for 15 minutes (HC 15 min).</div>

BioMed Research International

fig2

Figure 2

Figure 2: Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin 