Effect of Printing Layer Thickness and Postprinting Conditions on the Flexural Strength and Hardness of a 3D-Printed Resin

Table 1

Material compositions of the EVERES TEMPORARY (SISMA, Italy) 3D-printed resin used in this study.

Material	Compositions	Weight %	Lot#
EVERES TEMPORARY 3D-printed resins	Aliphatic difunctional methacrylate	<50%	276-957-5
	2,2-Ethylenedioxydiethyl dimethacrylate	<40%	—
	Aliphatic urethane acrylate	<20%	—
	Phosphine oxide	<2.5%	278-355-8