Research Article
Verification of Fracture Reorientation and Analysis of Influence Factors in Multiple Fracturing Treatment
Table 2
Basic parameters used in numerical simulation.
| | Parameter | Value |
| | Minimum horizontal stress/MPa | 20 | | Maximum horizontal stress/MPa | 16 | | Poisson’s ratio of rock | 0.25 | | Density of rock/() | 2000 | | Young’s modulus/GPa | 10 | | Biot coefficient | 0.70 | | Porosity | 0.1 | | Permeability/(10-3 μm2) | 1 | | Fracture porosity | 0.2 | | Reservoir pressure/MPa | 15 | | Produced well pressure/MPa | 6 | | Injected well pressure/MPa | 30 | | Oil density/() | 800 | | Water density/() | 1000 | | Oil viscosity/() | 50 | | Water viscosity/() | 1 | | Fluid compressibility/MPa-1 | 0.0003 | | Fracture half-length/m | 100 |
|
|
