Research Article
Transient Pressure Analysis for Multifractured Horizontal Well with the Use of Multilinear Flow Model in Shale Gas Reservoir
Table 1
Basic data used for the model.
| | Parameters | Value | Units |
| | Reference length | 0.1 | m | | Hydraulic fracture permeability in Zone I, | 1000 | mD | | Permeability in SRV Zone II, | 0.1 | mD | | Permeability in SRV Zone III, | 0.01 | mD | | Permeability in Zone IV, | 0.001 | mD | | Initial formation pressure, | 30 | MPa | | Fluid viscosity | | mPa·s | | Compressibility in Zone I, | | MPa-1 | | Compressibility in SRV Zone II, | | MPa-1 | | Compressibility in SRV Zone III, | | MPa-1 | | Compressibility in Zone IV, | | MPa-1 | | Porosity in Zone I | 0.15 | Fraction | | Porosity in SRV Zone II | 0.15 | Fraction | | Porosity in SRV Zone III | 0.15 | Fraction | | Porosity in Zone IV | 0.15 | Fraction | | Half-length of the fractures, | 100 | m | | Width of the SRV zone, | 100 | m | | Length of the SRV zone, | 150 | m |
|
|
