Research Article
Experimental and Numerical Simulation Study of Hydraulic Fracture Propagation during Coalbed Methane Development
Table 3
Input parameters for simulating hydraulic fracture propagates in naturally fractured reservoirs.
| Parameters | Value |
| Young’s modulus | 2.6 GPa | Poisson’s ratio | 0.25 | Formation effective permeability | 2.6-4 D | Porosity | 8% | Pressure dependent leak-off coefficient | 1-14 | Specific weight of injection fluid | 9800 | Fluid viscosity | 1 cp | Tensile strength of intact coal | 2 MPa | Shear strength of intact coal | 6 MPa | Tensile strength of natural fracture | 0.55 MPa | Shear strength of natural fracture | 1.75 MPa | Fracture displacement | 0.001 m | Injection rate | 0.01 m3/s | Initial pore pressure | 3.14 MPa |
|
|