Research Article
Integrated Geologic Modeling of Fault-Block Reservoir: A Case Study of Ss Oil Field
Table 2
General fluid properties at initial reservoir conditions and initialization parameters used in the modeling.
| Parameter | Value |
| Oil density | 0.6597 g/ | Oil viscosity | 0.3879 mPa·s | Oil bubble point pressure | 18.2186 MPa | Oil compression factor(co) | | Gas density | 1.04 kg/m3 | Water formation | NaHCO3,CaCl2 | Water viscosity | 0.3246 mPa·s | Reservoir pressure | 28.84 MPa | Reservoir temperature | 86°C | Geothermal gradient | 2.5 °C/100 m | Depth of water-oil contact | -2500 m |
|
|