Research Article
Estimation of Water Saturation in Shale Formation Using In Situ Multifrequency Dielectric Permittivity
Figure 6
SMD model-fitting for the core data that are fully saturated with water. Note that the implementation of curve-fitting only focuses on real part of the permittivity . is calculated DC conductivity from the estimated permittivity. Each panel (a, c, e) shows the expanded part of the high frequencies ( Hz) as highlighted with red rectangles in each panel (b, d, f), respectively.
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |