Study on Mechanical Properties of Submunition’s Ribbon Straightening Section

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Working conditions</td><td class="align_center">Working conditions (1)</td><td class="align_center">Working conditions (2)</td><td class="align_center">Working conditions (3)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">Hole diameter (mm)</td><td class="align_center">3</td><td class="align_center">4</td><td class="align_center">5</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>The working condition of the riveting hole of the ribbon.</div>

International Journal of Aerospace Engineering

tab2

Table 2

Table 2: Study on Mechanical Properties of Submunition’s Ribbon Straightening Section 