Study on Mechanical Properties of Submunition’s Ribbon Straightening Section

<table class="table-group" id="tab5"><tr><td><table class="table"><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr class="thead"><td class="align_left">Working conditions</td><td class="align_center">Working conditions (A)</td><td class="align_center">Working conditions (B)</td><td class="align_center">Working conditions (C)</td></tr><tr><td class="thead-hr" colspan="4"><hr/></td></tr><tr><td class="align_left">Riveting connector diameter (mm)</td><td class="align_center">7</td><td class="align_center">9</td><td class="align_center">11</td></tr><tr class="table-tr"><td colspan="4"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Diameter working conditions of riveting joints.</div>

International Journal of Aerospace Engineering

tab5

Table 5

Table 5: Study on Mechanical Properties of Submunition’s Ribbon Straightening Section 