International Journal of Dentistry
 Journal metrics
See full report
Acceptance rate15%
Submission to final decision123 days
Acceptance to publication21 days
CiteScore2.600
Journal Citation Indicator0.790
Impact Factor2.1

Flexural Strength of Translucent Zirconia Materials Produced with Different Multilayer Technologies: An In Vitro Study

Read the full article

 Journal profile

International Journal of Dentistry publishes original research articles and review articles in all areas of dentistry, including periodontal diseases, dental implants, oral pathology, as well as oral and maxillofacial surgery.

 Editor spotlight

International Journal of Dentistry maintains an Editorial Board of practicing researchers from around the world, to ensure manuscripts are handled by editors who are experts in the field of study. 

 Special Issues

We currently have a number of Special Issues open for submission. Special Issues highlight emerging areas of research within a field, or provide a venue for a deeper investigation into an existing research area.

Latest Articles

More articles
Research Article

Mineralization of Dentinal Lesions with Different Concentrations of Fluoride

Objectives. The present study aimed to investigate the relationship between fluoride concentration and mineral distribution within the dentinal lesion body. Methods. Remineralization of artificial deep dentinal lesions with various levels of fluoride was studied using a scanning electron microscope, microhardness tests, and polarized light microscope. Human molars were exposed to demineralization at pH 5.0 for 2 weeks. Then, they were divided into different groups for remineralization with different fluoride concentrations (0.1–10.0 ppm) for 1, 2, 3, and 4 weeks. Results. The results indicated a proportional relationship between fluoride concentration and dentinal lesion remineralization from 0.1 to 10.0 ppm. In the present study, the formation of a well-remineralized surface layer inhibited remineralization at the lesion front. On the other hand, the lesion front remineralization was found to be independent of fluoride concentration. Conclusion. Our results stated that for effective remineralization of dentinal lesions to the innermost part, fluoride levels from 1.0 to 5.0 ppm have the highest efficiency.

Review Article

Effect of TiO2 Abutment Coatings on Peri-Implant Soft Tissue Behavior: A Systematic Review of In Vivo Studies

Establishing a proper soft tissue adhesion around the implant abutment is essential to prevent microbial invasion, inhibit epithelial downgrowth, and obtain an optimal healing process. This systematic review aims to evaluate the real potential of TiO2 coating on the behavior of peri-implant soft tissue health and maintenance. A specific aim was to evaluate clinically and histologically the effect of TiO2 abutment coating on epithelial and connective tissue attachment. Electronic database searches were conducted from 1990 to 2023 in MEDLINE/PubMed and the Web of Science databases. In total, 15 out of 485 publications were included. Eight studies involved humans, and seven were animal studies. Exposure time ranges from 2 days to 5 years. The peri-implant soft tissue evaluations included clinical assessment (plaque index (PI), peri-implant probing pocket depth (PPD), and bleeding on probing (BoP)), histological as well as histomorphometric analysis. The Office of Health Assessment and Translation (OHAT) Risk of Bias Rating Tool for Human and Animal Studies was used to evaluate the overall quality of the studies included in the review. The results showed some variation but remained within acceptable limits. Within the limitations of this systematic review, the present findings suggest that TiO2 coatings seem to influence soft tissue healing. TiO2-coated abutments with a roughness value between 0.2 and 0.5 μm enhance soft tissue health. Sol-gel-derived TiO2 coatings induced better soft tissue attachment than noncoated machined abutment surfaces. The anodized titanium abutments demonstrate comparable clinical and histological outcomes to conventional machined abutments. However, there was variation among the included studies concerning TiO2 coating characteristics and the measured outcomes used to evaluate the soft tissue response, and therefore, quantitative analysis was not feasible. Long-term in vivo studies with standardized soft tissue analysis and coating surface parameters are necessary before a definitive conclusion can be drawn. OSF Registration No.: 10.17605/OSF.IO/E5RQV.

Research Article

Studying and Characterization of Coating of Zein–CaSiO3 Composite on Polyetheretherketone Implant Material

Material-coated implants are placed in the bone and play an essential role in bone regeneration and rapid healing around implants. Polymeric matrix reinforced with ceramic materials is a promising composite material for coating implants. This study aims to determine the effect of mixing various concentrations of zein with CaSiO3 on polyetheretherketone (PEEK) as implant material. The coating was performed using the electrospray method. PEEK disks were used as a control group. The coated disks with different concentrations of zein–CaSiO3 (Group 1: 10% wt, 90% wt), (Group 2: 20% wt, 80% wt), and (Group 3%: 30% wt, 70% wt) were the experimental group. Each group was characterized by atomic force microscopy, field emission scanning electron microscope, Fourier-transform infrared spectroscopy, water contact angle, and adhesion strength. The lowest water contact angle was obtained for Group 1: 10% wt and 90% wt were (26.64° and 27.13°, respectively), and increasing amounts of zein in comparison to quantities of CaSiO3 resulted in increased adhesion strength of the composite material to the substrate. The current study suggested that the higher amount of zein compared to the amount of CaSiO3 mixture coating is achieved by electrospraying, a favorable candidate for coating implants compared to uncoated and coated disks with low concentrations of zein compared to concentrations of CaSiO3.

Research Article

Exploring the Challenges in Covering Dental Services through Complementary Insurance in Iran: A Qualitative Study

Background. Financial protection is crucial for attaining universal health coverage. The inclusion of costly dental services in insurance plans poses a significant challenge for all parties involved in the insurance sector. This study aimed to investigate the challenges of covering dental services by complementary insurance in Iran during 2020–2021. Materials and Methods. This qualitative research was conducted in Iran during 2020–2021. A triangulation of methods and data sources were employed to achieve a comprehensive perspective. In-depth semistructured interviews were conducted on an individual basis, and all national documents, rules, regulations, and instructions pertaining to complementary dental insurance were thoroughly reviewed. Purposeful sampling was used to select participants from all stakeholder groups engaged in dental insurance coverage, including (1) health system policymakers, (2) insurers, (3) policyholders, (4) care providers (dentists), and (5) insured people. Six open-ended questions were formulated to explore various facets of dental insurance, including (1) development, (2) management, (3) population coverage, (4) premium calculation, (5) services coverage, and (6) payment and reimbursement mechanisms. With the consent of the participants, all interviews were recorded and transcribed verbatim. The gathered data were evaluated using a framework analysis approach in the MAXQDA20 software. Finally, the primary themes, each encompassing multiple subthemes, were identified and presented. Results. A total of 26 interviews were conducted with five groups of interviewees, and nine national documents were evaluated. Six themes were extracted, which included 18 codes from the interviews and seven codes from the documents. The extracted themes were as follows: (1) Insurance commitments and service coverage, (2) reimbursement system, (3) information system, (4) economic issues, (5) population coverage, and (6) regulation and supervision. The high cost of dental services was the most frequent challenge, followed by the insurance commitments and service coverage. Conclusions. The delivery of dental services through complementary insurance in Iran primarily faces economic and service coverage challenges. The resolution hinges on the collaboration between basic and complementary insurance sectors, the development of a unified information system for insured individuals, and the implementation of a risk-adjusted premium plan.

Research Article

Analysis of Physical and Mechanical Properties of Universal Composites under Different Types of Polishing before and after Acid Challenge

This study aimed to evaluate in vitro the degree of surface smoothness provided by two different polishing techniques and the effect of acid challenge on the alteration of surface roughness (Ra), microhardness (Knoop), and color (ΔE00) of three nanoparticulate composites, simulating 1 year of exposure to hydrochloric acid (HCl). Eighty specimens for each composite were divided into four groups (n = 240), being control without polishing, control with wear, WPC (wear + polishing with Cosmedent Kit), and WPB (wear + BisCover LV liquid polish). Repeated measures ANOVA was applied for Ra and Knoop Microhardness. For the color (ΔE) three-way ANOVA was applied. In cases of statistically significant the Tukey posttest was applied (α = 0.05). Both types of polishing tested resulted in a surface smoothness below the critical value established by the studies (Ra ≥ 0.2 μm), even after immersion. The microhardness of all composite resins decreased after the challenges. The specimens immersed in HCl showed a lower microhardness (42.2 Kgf/mm2) when compared to the specimens immersed in artificial saliva (44.7 Kgf/mm2). Regarding the color change, the composites presented values compatible with clinical acceptability, with a statistically significant difference only between the control group and the other types of polishing for the Z350 XT resin (ΔE00 = 3.78). It was concluded that both mechanical and chemical polishing produced a satisfactory surface smoothness, even after immersions in artificial saliva and HCl. The microhardness of the composites was affected by the challenges and the composites tested were within clinical acceptability with regard to color change.

Research Article

Do Different Tooth Bleaching–Remineralizing Regimens Affect the Bleaching Effectiveness and Enamel Microhardness In Vitro?

Objective. Tooth bleaching may negatively affect the enamel surface properties, such as reduction in hardness values, and remineralizing agents can reverse these effects. This study evaluated the effect of remineralizing agents before, during, and after the bleaching process on enamel’s whitening effectiveness and microhardness. Methods and Materials. The initial color of 104 bovine incisors after immersion in tea solution was recorded, and then, the teeth were randomly divided into eight groups (n = 13). Group 1 (NC) was considered the control with no treatment, and Group 2 (B) was bleached with 40% hydrogen peroxide gel. The 3% fluorohydroxyapatite (FHA) and 2% sodium fluoride (NaF) were applied before (FHA/B, NaF/B), during (FHA + B, NaF + B) and after (B/FHA, B/NaF) the bleaching process in other groups. The final color and microhardness in three depths of 20–30, 50–60, and 100–120 µm were measured. Data were analyzed using Shapiro–Wilk, one-way ANOVA, Tukey, Games Howell, repeated measurement, and LSD tests. Results. The FHA + B presented the lowest ΔE, significantly lower than other groups, except B/FHA. The ΔE in B/FHA was significantly lower than B/NaF. The bleaching significantly reduced the enamel hardness in three depths. The highest microhardness values were reported for B/NaF and NaF + B, which have no noticeable difference with NC, while FHA/B showed the lowest hardness in three depths, which was significantly lower than NC. Conclusion. The application of NaF before, during, and after the bleaching improved the microhardness of bleached enamel as the unbleached one with no adverse effect on whitening effectiveness.

International Journal of Dentistry
 Journal metrics
See full report
Acceptance rate15%
Submission to final decision123 days
Acceptance to publication21 days
CiteScore2.600
Journal Citation Indicator0.790
Impact Factor2.1
 Submit Check your manuscript for errors before submitting

Article of the Year Award: Impactful research contributions of 2022, as selected by our Chief Editors. Discover the winning articles.