Differential-to-Common-Mode Noise Conversion Suppression on Right-Angle-Bent Differential Transmission Lines Using 3D-Printed Dielectric Materials

<div>Photographs of right-angle-bent DTLs (a) without dielectric material and (b) with a dielectric material.</div>

International Journal of RF and Microwave Computer-Aided Engineering

fig7

Figure 7

Figure 7: Differential-to-Common-Mode Noise Conversion Suppression on Right-Angle-Bent Differential Transmission Lines Using 3D-Printed Dielectric Materials 

Figure 7 | Differential-to-Common-Mode Noise Conversion Suppression on Right-Angle-Bent Differential Transmission Lines Using 3D-Printed Dielectric Materials 