Abstract
The majority of anions found in beer are a consequence of impurities derived from the water used during the brewing process. The process of beer manufacture consists of malting, brewing and fermentation followed by maturation before filtration and finally storage. Strict quality control is required because the presence of certain anions outside strictly defined tolerance limits can affect the flavour characteristics of the finished product. The anions present were quantified using the technique of ion chromatography with the Metrohm modular system following sample preparation. The analysis produced a result of the order 200 mg l-1 for chloride, phosphate and sulphate and around 20 mg l-1 for nitrate. If the chloride level exceeds 250 mg l-1, then the sweetness of the beer is enhanced, but yeast flocculation can be hindered. An excess of sulphate can give a sharp, dry edge to hopped beers and excessive amounts of nitrate have been found to harm the yeast metabolism after conversion to the nitrite form. As water is a primary ingredient within beer, its quality and type is a fundamental factor in establishing many of the distinctive regional beers that can be found in the United Kingdom and is thus monitored carefully.