Wearable Active Electrode for sEMG Monitoring Using Two-Channel Brass Dry Electrodes with Reduced Electronics

Table 1

Technical specifications of sEMG sensors.

sEMG sensor
General	# of channels	2
	Resolution	10 bits
	Interface	USB USART
	Sampling rate	1000 Hz
	Power supply	±9 Vdc
	Size	2.2 cm × 4.7 cm
EMG channels	Input configuration	Single differential
	Input range	0–20 mV
	Gain	245
	High-pass filter	Not required
	Low-pass filter	450 Hz
	Noise level	μV
	CMRR	96 dB
	Input impedance
Additional features	Accessories	Elastic band