Holistic Approach in Designing the Personalized Bone Scaffold: The Case of Reconstruction of Large Missing Piece of Mandible Caused by Congenital Anatomic Anomaly

Figure 4

Design parameters that can be used for adjusting the requested deformation [2]. (b) Initial design. (c) Struts’ density. (d) Low struts’ density. (e) Thick cross section. (f) Thin cross section. (g) Wide strut’s angle. (h) Sharp strut’s angle.

(a)

(b)

(c)

(d)

(e)

(f)

(g)

(h)