Research Article

Influence of 1D and 2D Carbon Fillers and Their Functionalisation on Crystallisation and Thermomechanical Properties of Injection Moulded Nylon 6,6 Nanocomposites

Table 1

Crystallisation properties obtained from melting curves of DSC.

Nylon 6,6Melting temperature, °CPercentage of crystallinity, %
263.7737.68

NanofillerWeight %Weight %
0.10.30.50.10.30.5

CNT263.8264.9263.237.838.138.1
OCNT263.8263.8263.238.839.139.3
f-CNT262.6263.8263.842.038.538.1
RGO264.3264.4264.338.038.838.9
GO263.2263.2263.239.140.941.0
f-Ge264.3263.2263.238.140.841.0