Research Article
[Retracted] Experimental Study on Surface Roughness and Flank Wear in Turning of Nimonic C263 under Dry Cutting Conditions
Table 6
Optimization goals and limits.
| | S. No. | Parameter and Result | Goal | Minor limit | Greater limit | Inferior weight | Superior weight | Significance |
| | 1 | -m/min | Is in variety | 80 | 190 | 1 | 1 | 3 | | 2 | -mm/rev | Is in choice | 0.055 | 0.159 | 1 | 1 | 3 | | 3 | -mm | Is in choice | 0.25 | 0.75 | 1 | 1 | 3 | | 5 | -μm | Minimalize | 1.45 | 3.1 | 1 | 1 | 3 | | 6 | VB-mm | Minimalize | 0.29 | 0.47 | 1 | 1 | 3 |
|
|
