Shock Hugoniot Data for Water up to 5 Mbar Obtained with Quartz Standard at High-Energy Laser Facilities

Table 1

Hugoniot data from the impedance mismatch method with -quartz as a reference material. The velocity of shock in quartz and water was used in the IM analysis to obtain the particle velocity , pressure , and density on water Hugoniot. The compressibility was calculated by dividing by the initial density. Water target was studied at two different high-power laser facilities.

Facility	Shot ID
GEKKO XII-ILE	43045	2.65	0.9848	21.8 ± 0.3	25.7 ± 0.4	18.2 ± 0.2	4.6 ± 0.2	164.4 ± 10.6	3.3 ± 0.1	3.4
	43051	2.65	0.9848	16.1 ± 0.2	18.6 ± 0.2	12.5 ± 0.1	2.3 ± 0.09	78.8 ± 5.1	3.00 ± 0.1	3.0
	43058	2.65	0.9848	14.0 ± 0.1	16.0 ± 0.2	10.4 ± 0.1	1.6 ± 0.06	54.7 ± 3.3	2.8 ± 0.10	2.8
	43063	2.65	0.9848	10.0 ± 0.1	11.6 ± 0.1	7.0 ± 0.1	0.8 ± 0.02	20.9 ± 1.3	2.5 ± 0.07	2.5
PHELIX GSI	S20	2.65	0.9848	8.9 ± 0.1	9.8 ± 0.1	5.4 ± 0.1	0.5 ± 0.01	14.7 ± 0.9	2.1 ± 0.05	2.2
	S21	2.65	0.9848	18.9 ± 0.2	22.1 ± 0.3	15.5 ± 0.2	3.4 ± 0.1	120.9 ± 7.8	3.3 ± 0.16	3.3
	S27	2.65	0.9848	12.9 ± 0.1	14.5 ± 0.2	9.3 ± 0.1	1.3 ± 0.05	43.3 ± 2.8	2.7 ± 0.1	2.8
	S32	2.65	0.9848	10.8 ± 0.1	12.0 ± 0.1	7.2 ± 0.1	0.87 ± 0.03	26.2 ± 1.7	2.4 ± 0.07	2.5