Design of Multipoint Temperature and Humidity Silverware Forging for Engraving Process Measurement System Based on ZigBee Technology

Table 7

Button name and function description table.

Name	Function description
SET	(1) On the monitoring interface, press this key to enter the function setting
	(2) It is used to jump to the next configuration item in the configuration interface of the function
OK	Return to the status display interface in the function configuration interface, and completethe confirmation for confirming certain selections
LEFT	(1) Function configuration interface 1 is used to adjust the position of the selected item
	(2) The function configuration interface 2 is used to move the position of the selected number to the left
RIGNT	(1) Function configuration interface 1 is used to adjust the position of the selected item
	(2) The function configuration interface 2 is used to move the position of the selected number to the right
UP	The function configuration is used to increase the value of a specific number in interface 2
DOWN	The function configuration is used to increase the value of a specific number in interface 2