Multiobjective Design of Turbo Injection Mode for Axial Flux Motor in Plastic Injection Molding Machine by Particle Swarm Optimization

Table 1

Selected control factors and noise factors.

Factor	Level
	Level 1	Level 2	Level 3
(A) Wire dimension	4 × 0.7 mm	4 × 1.0 mm	4 × 1.2 mm
(B) Stator winding type	normal	overlap	Wye-wye
(C) Air-gap	1.0 mm	2.0 mm	3.0 mm
(D) Insulation layer thickness	0.30 mm	0.40 mm	0.50 mm
(E) Temperature	38°C	48°C	58°C