Research Article
Multiobjective Optimization of Injection Molding Process Parameters for the Precision Manufacturing of Plastic Optical Lens
Table 5
The IMPP and their levels for 34 full factors experiment.
| IMPP | Level 1 | Level 2 | Level 3 |
| : melt temperature (°C) | 220 | — | — | : injection velocity (mm/s) | 65 | — | — | : injection pressure (MPa) | 60 | 70 | 80 | : VP switch over (mm) | 5.5 | — | — | : packing time (s) | 5 | — | — | : packing pressure (MPa) | 90 | 100 | 110 | : mold temperature (°C) | 60 | 75 | 90 | : cooling time (s) | 15 | 25 | 35 |
|
|