Research Article
Modified Mechanistic Model Based on Gaussian Process Adjusting Technique for Cutting Force Prediction in Micro-End Milling
Table 4
Cutting coefficients of end milling.
| | Exp.no. | | | | | | |
| | 1 | -360.007 | -2.8842 | -4.1587 | 0.4246 | 0.5135 | 0.3572 | | 2 | -360.007 | -2.8842 | -4.1587 | 0.4246 | 0.5135 | 0.386 | | 3 | -352.554 | -2.8245 | -4.0726 | 0.4158 | 0.5028 | 0.0587 | | 4 | -352.554 | -2.8245 | -4.0726 | 0.4158 | 0.5028 | -0.3146 | | 5 | -352.554 | -2.8245 | -4.0726 | 0.4158 | 0.5028 | -0.3987 | | 6 | -347.289 | -2.7823 | -4.0118 | 0.4096 | 0.4953 | -0.1144 | | 7 | -347.289 | -2.7823 | -4.0118 | 0.4096 | 0.4953 | 0.2691 | | 8 | -367.34 | -2.943 | -4.2434 | 0.4332 | 0.5239 | 0.4286 | | 9 | -367.34 | -2.943 | -4.2434 | 0.4332 | 0.5239 | 0.1785 | | 10 | -359.89 | -2.8833 | -4.1573 | 0.4244 | 0.5133 | -0.2309 | | 11 | -359.89 | -2.8833 | -4.1573 | 0.4244 | 0.5133 | -0.4244 | | 12 | -359.89 | -2.8833 | -4.1573 | 0.4244 | 0.5133 | -0.2277 | | 13 | -354.626 | -2.8411 | -4.0965 | 0.4182 | 0.5058 | 0.1757 | | 14 | -354.626 | -2.8411 | -4.0965 | 0.4182 | 0.5058 | 0.4143 | | 15 | -372.544 | -2.9846 | -4.3035 | 0.4393 | 0.5313 | 0.2857 | | 16 | -372.544 | -2.9846 | -4.3035 | 0.4393 | 0.5313 | -0.1265 | | 17 | -365.095 | -2.925 | -4.2174 | 0.4306 | 0.5207 | -0.4139 | | 18 | -365.095 | -2.925 | -4.2174 | 0.4306 | 0.5207 | -0.3233 | | 19 | -359.831 | -2.8828 | -4.1566 | 0.4243 | 0.5132 | 0.0636 | | 20 | -359.831 | -2.8828 | -4.1566 | 0.4243 | 0.5132 | 0.3874 | | 21 | -360.007 | -2.8842 | -4.1587 | 0.4246 | 0.5135 | 0.3552 | | 22 | -347.289 | -2.7823 | -4.0118 | 0.4096 | 0.4953 | -0.0036 | | 23 | -367.34 | -2.943 | -4.2434 | 0.4332 | 0.5239 | -0.3666 | | 24 | -354.626 | -2.8411 | -4.0965 | 0.4182 | 0.5058 | -0.3787 | | 25 | -372.544 | -2.9846 | -4.3035 | 0.4393 | 0.5313 | -0.0581 | | 26 | -365.095 | -2.925 | -4.2174 | 0.4306 | 0.5207 | 0.3283 | | 27 | -359.831 | -2.8828 | -4.1566 | 0.4243 | 0.5132 | 0.4058 |
|
|
