EHL Analysis of Spiral Bevel Gear Pairs considering the Contact Point Migration due to Deformation under Load

Table 3

Results from LTCA at 50 Nm torque load.

Pinion roll angle (rad)	EMP coordinate (mm)	EMP coordinate (mm)	EMP coordinate (mm)	Direction cosine	Direction cosine	Direction cosine
0.243	99.7576	−30.5724	−3.6266	−0.6314	−0.1616	0.7584
0.279	98.5905	−30.3121	−3.4352	−0.6292	−0.1612	0.7604
0.315	97.5790	−30.1337	−3.0758	−0.6287	−0.1601	0.7610
0.351	96.8110	−30.0895	−2.6075	−0.6300	−0.1585	0.7602
0.387	96.1453	−30.1450	−2.0752	−0.6325	−0.1567	0.7585
0.423	95.5419	−30.2295	−1.5013	−0.6355	−0.1551	0.7564
0.459	94.9332	−30.2986	−0.9084	−0.6384	−0.1537	0.7542
0.495	94.2516	−30.3383	−0.3472	−0.6411	−0.1524	0.7521
0.531	93.5125	−30.3130	0.0996	−0.6430	−0.1517	0.7507
0.567	92.5259	−30.1382	0.3517	−0.6429	−0.1518	0.7508
0.603	91.2030	−29.7399	0.3843	−0.6401	−0.1530	0.7529
0.639	89.6923	−29.1538	0.2597	−0.6352	−0.1550	0.7566
0.675	87.9616	−28.5399	0.1086	−0.6299	−0.1569	0.7606
0.711	86.6346	−28.0720	0.0663	−0.6265	−0.1577	0.7633
0.747	85.5889	−27.8106	0.2067	−0.6257	−0.1574	0.7640
0.783	84.7482	−27.6927	0.5181	−0.6271	−0.1565	0.7631
0.819	84.0397	−27.6341	0.9342	−0.6294	−0.1555	0.7613
0.855	83.3518	−27.6126	1.3925	−0.6323	−0.1546	0.7592
0.891	82.8174	−27.6494	1.8746	−0.6357	−0.1535	0.7565
0.927	82.3046	−27.7419	2.3997	−0.6400	−0.1521	0.7532
0.963	81.8595	−27.8471	2.9825	−0.6445	−0.1505	0.7496