Cutting Force Modeling and Experimental Study for Ball-End Milling of Free-Form Surfaces

Figure 10

Comparison of predicted cutting force and actual cutting force for arc surface cutting. (a) Change of the predicted cutting force peak in the X direction. (b) Change of the measured cutting force peak in the X direction. (c) Change of the predicted cutting force peak in the Y direction. (d) Change of the measured cutting force peak in the Y direction. (e) Change of the predicted cutting force peak in the Z direction. (f) Change of the measured cutting force peak in the Z direction.

(a)

(b)

(c)

(d)

(e)

(f)