Calibration and Analysis of Mechanical Modeling for Traction Wire Rope of Mountainous Orchard Carrier

<div>Contact diagram between wires and wires. (a) The wire axes of the strands cross each other (the angle <i>φ</i> = 40° is the angle made by the tangents to the ropes middle line at the cross point). (b) The steel wire axes in the strands are parallel to each other.</div>

Mathematical Problems in Engineering

fig9

Figure 9

Figure 9: Calibration and Analysis of Mechanical Modeling for Traction Wire Rope of Mountainous Orchard Carrier 