Research Article
Influence of the Hydraulic Circuit Setup on the Dynamic Performance of an Axial Piston Pump by Numerical and Experimental Analysis
Table 1
The pumps characteristics and the model parameters.
| Parameters | Pump 1 | Pump 2 |
| The rotary inertia, (kg·m3) | | | Spring damper stiffness, (Nm/rad) | | | Weight (kg) | | 28.8 | Nominal displacement (cm3/rev) | | | Continuous pressure (bar) | | | Swash plate angle (degree) | | | Rotational speed limits (RPM) | – | – | Spring damper damping, (Nm/(rad/s)) | | Number of pistons | 9 | The speed of sound in a hydraulic oil, (m/s) | | The cross-section of the flexible pipe, (cm2) | | Length of pipe 1, (m) | | Volume of pipe 2, (cm3) | | The maximum coefficient, | 0.7 | Resonance frequency, (Hz) | | Estimated Young’s modulus at 100 bar (MPa) | | Estimated Young’s modulus at 200 bar (MPa) | | Density of VG 46 (kg/m3) | | Bulk modulus of VG at 100 bar gauge (MPa) | | Bulk modulus of VG at 200 bar gauge (MPa) | | Bulk modulus of VG at 300 bar gauge (MPa) | | Viscosity of VG at 100 bar gauge (cP) | | Viscosity of VG at 200 bar gauge (cP) | | Viscosity of VG at 300 bar gauge (cP) | |
|
|