Analysis of Machining Parameters in WEDM of Al/SiCp20 MMC Using Taguchi-Based Grey-Fuzzy Approach

Table 2

Experimental setup details.

S. No.	Experimental facility	Specifications
1	Wire electric discharge machine	Ultracut S0 wire Electronic Discharge Machine (M/S Electronica, Ultracut So Model, Pune, Maharashtra, India)
2	Electrode/wire	Brass cutting wire (diameter of 0.25 mm)
3	Type of dielectric fluid	Distilled water
4	Water pressure	15 lit/min
5	Wire tension	Setting 9 (1150 to 1200 grams)
6	Servo voltage	30 volts
7	Device used for measuring surface roughness.	Make: Mitutoyo, model: Surftest SJ-201