Microstructure and Properties of ER50-6 Steel Fabricated by Wire Arc Additive Manufacturing

Table 3

The parameters of indentation from the load-displacement curves in Figure 8.

Sample	Location	(nm)	(nm)		EIT (GPa)
1#	Bottom	339.02	316.07	0.08	258.22
	Middle	358.66	338.82	0.06	286.09
	Top	346.44	323.59	0.07	252.16
2#	Bottom	328.77	308.83	0.06	316.44
	Middle	331.16	311.21	0.06	312.9
	Top	326.26	302.83	0.07	262.61