The influence of Ta additions on the microstructure and properties of Cu-Al-Ni shape memory alloys was investigated in this paper. The addition of Ta significantly affects the green and porosity densities; the minimum percentage of porosity was observed with the modified prealloyed Cu-Al-Ni-2.0&#x2009;wt.&#x25; Ta. The phase transformation temperatures were shifted towards the highest values after Ta was added. Based on the damping capacity results, the alloy of Cu-Al-Ni-3.0&#x2009;wt.&#x25; Ta has very high internal friction with the maximum equivalent internal friction value twice as high as that of the prealloyed Cu-Al-Ni SMA. Moreover, the prealloyed Cu-Al-Ni SMAs with the addition of 2.0&#x2009;wt.&#x25; Ta exhibited the highest shape recovery ratio in the first cycle (i.e., 100&#x25; recovery), and when the number of cycles is increased, this ratio tends to decrease. On the other hand, the modified alloys with 1.0 and 3.0&#x2009;wt.&#x25; Ta implied a linear increment in the shape recovery ratio with increasing number of cycles. Polarization tests in NaCl solution showed that the corrosion resistance of Cu-Al-Ni-Ta SMA improved with escalating Ta concentration as shown by lower corrosion current densities, higher corrosion potential, and formation of stable passive film.

Safaa N. Saud

E. Hamzah

H. R. Bakhsheshi-Rad

T. Abubakar

Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Prealloyed Cu-Al-Ni Shape Memory Alloys

 The aim of this study was to evaluate in fibroblast cultures the direct cytotoxic effects of etch-and-rinse, self-etch, and universal adhesive systems. The sterile glass cover slips (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-0.2063904pt" id="M1" height="8.55521pt" version="1.1" viewBox="-0.0498162 -8.34882 27.8368 8.55521" width="27.8368pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-111" d="M495 86L479 114C446 82 419 66 409 66C401 66 401 72 406 97C420 166 436 231 453 297C489 435 454 448 428 448C406 448 384 439 354 422C305 394 222 327 161 247H159L183 345C200 415 194 448 173 448C143 448 82 410 23 351L38 325C64 349 95 371 105 371C111 371 116 365 109 336L25 -4L31 -12C50 -4 77 3 107 9C119 69 132 122 145 168C197 254 321 381 370 381C387 381 393 374 378 305L329 95C309 17 320 -12 345 -12C372 -12 430 19 495 86Z"/></g><g transform="matrix(.013,0,0,-0.013,10.158,0)"><path id="g117-34" d="M535 323V373H52V323H535ZM535 138V188H52V138H535Z"/></g><g transform="matrix(.013,0,0,-0.013,21.421,0)"><path id="g113-52" d="M285 378C315 398 338 416 353 432C373 451 384 474 384 503C384 579 325 635 236 635H235C182 635 136 610 108 579L65 516L85 496C110 533 150 575 205 575C258 575 300 543 300 481C300 407 232 369 141 339L147 310C163 315 188 321 211 321C268 321 338 284 338 192C338 94 288 40 217 40C160 40 119 68 93 91C85 98 77 97 69 91C60 84 47 71 46 58C44 46 48 35 62 22C75 10 116 -12 162 -12C234 -12 424 62 424 224C424 297 373 359 285 376V378Z"/></g></svg>) were then immersed in culture medium to obtain the eluates for the experimental groups: (1) Adper™ Single Bond 2; (2) Ambar; (3) Adper™ Scotchbond™ Multi-Purpose; (4) Scotchbond™ Universal; (5) Ambar Universal; and (6) OptiBond All-In-One. As a negative control, sterile glass cover slips were immersed in culture medium only. After 24 h, the eluate obtained was applied on fibroblast culture. Cell viability and cell morphology were evaluated by MTT assay and SEM, respectively. Data were analyzed by Kruskal–Wallis and Mann–Whitney tests (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-0.2063904pt" id="M2" height="8.55521pt" version="1.1" viewBox="-0.0498162 -8.34882 44.1999 8.55521" width="44.1999pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-223" d="M545 106L524 126C493 85 467 65 455 65C438 65 427 113 405 238C448 295 498 362 543 439L533 448L478 435C453 386 423 331 398 295H395C370 404 347 448 282 448C169 448 23 309 23 153C23 54 65 -12 128 -12C203 -12 283 70 339 155H341C360 29 380 -12 411 -12C444 -12 491 11 545 106ZM333 204C265 95 210 54 169 54C137 54 113 96 113 171C113 302 191 405 252 405C301 405 318 306 333 204Z"/></g><g transform="matrix(.013,0,0,-0.013,11.017,0)"><use xlink:href="#g117-34"/></g><g transform="matrix(.013,0,0,-0.013,22.28,0)"><path id="g113-49" d="M241 635C89 635 35 457 35 312C35 153 89 -12 240 -12C390 -12 443 166 443 312C443 466 390 635 241 635ZM238 602C329 602 354 454 354 312C354 172 330 22 240 22C152 22 124 173 124 313S148 602 238 602Z"/></g><g transform="matrix(.013,0,0,-0.013,28.52,0)"><path id="g113-47" d="M113 -12C146 -12 170 11 170 46C170 78 146 103 114 103S58 78 58 46C58 11 82 -12 113 -12Z"/></g><g transform="matrix(.013,0,0,-0.013,31.484,0)"><use xlink:href="#g113-49"/></g><g transform="matrix(.013,0,0,-0.013,37.724,0)"><path id="g113-54" d="M153 550H386L412 615L406 623H120L82 318C104 327 142 338 184 338C294 338 347 275 347 187C347 112 305 39 221 39C160 39 119 71 97 89C88 97 80 96 71 90C59 80 50 67 49 57C48 45 52 36 66 23C80 9 123 -12 169 -12C221 -11 288 15 342 59C403 109 431 165 431 225C431 308 366 395 238 395C212 395 165 379 127 364L153 550Z"/></g></svg>). All adhesive systems except universal reduced cell viability in 3T3 cells to between 26.04% and 56.57%, and Scotchbond Universal and Ambar Universal reduced cell viability to 2.13% and 3.57%, respectively, when compared to the negative control. Cytoplasmic membrane shrinkage and cell-free areas with residual membrane fragments from dead cells were observed. In conclusion, improvements in universal adhesive system formulations and their mechanisms of action are not accompanied by increased toxicity compared with those in other systems, warranting commitment to the use of these dentin-pulp complexes.

Yasmine Mendes Pupo

Cintia Fernanda de Freitas Bernardo

Francielly Fernanda de Freitas A. de Souza

Milton Domingos Mich&#xe9;l

Camila Nunes de Morais Ribeiro

Sandro Germano

Daniela Florencio Maluf

Cytotoxicity of Etch-and-Rinse, Self-Etch, and Universal Dental Adhesive Systems in Fibroblast Cell Line 3T3

Many handmade ancient and recent oriental wool carpets show outstanding brilliance and persistence of colour that is not achieved by common industrial dyeing procedures. Anthropologists have suggested the influence of wool fermentation prior to dyeing as key technique to achieve the high dyeing quality. By means of <i>&#x3bc;</i>-XRF elemental mapping of mordant metals we corroborate this view and show a deep and homogenous penetration of colourants into fermented wool fibres. Furthermore we are able to apply this technique and prove that the fermentation process for ancient specimens cannot be investigated by standard methods due to the lack of intact cuticle layers. This finding suggests a broad range of further investigations that will contribute to a deeper understanding of the development of traditional dyeing techniques. Spectroscopic studies add information on the oxidation states of the metal ions within the respective mordant-dye-complexes and suggest a partial charge transfer as basis for a significant colour change when Fe mordants are used.

Markus Meyer

Camelia N. Borca

Thomas Huthwelker

Manfred Bieber

Karl Me&#xdf;linger

Rainer H. Fink

Andreas Sp&#xe4;th

<i>&#xb5;</i>-XRF Studies on the Colour Brilliance in Ancient Wool Carpets

This study aimed to investigate the effect of a fluoride varnish with added casein phosphopeptide-amorphous calcium phosphate treatment on the prevention of enamel erosion, and it compared the results with those of other fluoride varnishes. Fifty enamel specimens obtained from bovine incisors were randomly divided into five groups (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-0.2063904pt" id="M1" height="8.55521pt" version="1.1" viewBox="-0.0498162 -8.34882 34.1002 8.55521" width="34.1002pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-111" d="M495 86L479 114C446 82 419 66 409 66C401 66 401 72 406 97C420 166 436 231 453 297C489 435 454 448 428 448C406 448 384 439 354 422C305 394 222 327 161 247H159L183 345C200 415 194 448 173 448C143 448 82 410 23 351L38 325C64 349 95 371 105 371C111 371 116 365 109 336L25 -4L31 -12C50 -4 77 3 107 9C119 69 132 122 145 168C197 254 321 381 370 381C387 381 393 374 378 305L329 95C309 17 320 -12 345 -12C372 -12 430 19 495 86Z"/></g><g transform="matrix(.013,0,0,-0.013,10.158,0)"><path id="g117-34" d="M535 323V373H52V323H535ZM535 138V188H52V138H535Z"/></g><g transform="matrix(.013,0,0,-0.013,21.421,0)"><path id="g113-50" d="M384 0V27C293 34 287 42 287 114V635C232 613 172 594 109 583V559L157 557C201 555 205 550 205 499V114C205 42 199 34 109 27V0H384Z"/></g><g transform="matrix(.013,0,0,-0.013,27.661,0)"><path id="g113-49" d="M241 635C89 635 35 457 35 312C35 153 89 -12 240 -12C390 -12 443 166 443 312C443 466 390 635 241 635ZM238 602C329 602 354 454 354 312C354 172 330 22 240 22C152 22 124 173 124 313S148 602 238 602Z"/></g></svg>) based on the type of surface pretreatment used: intact enamel (Group 1); intact enamel+erosive cycles (Group 2); intact enamel+MI varnish+erosive cycles (Group 3); intact enamel+Clinpro White varnish+erosive cycles (Group 4); and intact enamel+Duraphat varnish+erosive cycles (Group 5). The specimens were subjected to erosive cycles for five days. The surface roughness was evaluated using atomic force microscopy. The results were statistically analyzed using one-way ANOVA and Tukey’s tests. Group 1 had the smoothest surfaces. After the erosive cycles, the greatest surface roughness values were observed in Group 2, followed by Groups 5, 4, and 3, respectively. Statistically significant differences were observed among all groups (<svg xmlns:xlink="http://www.w3.org/1999/xlink" xmlns="http://www.w3.org/2000/svg" style="vertical-align:-3.42938pt" id="M2" height="11.7782pt" version="1.1" viewBox="-0.0498162 -8.34882 44.5261 11.7782" width="44.5261pt"><g transform="matrix(.013,0,0,-0.013,0,0)"><path id="g113-113" d="M570 304C570 398 525 448 414 448C385 448 343 445 312 434L329 511L321 518C297 504 262 482 244 460L233 411C195 397 159 381 128 358L135 332C160 347 189 360 224 373L111 -147C97 -210 84 -218 17 -231L13 -257L254 -247L259 -218L233 -216C183 -212 177 -202 189 -142L218 -1C238 -10 266 -12 283 -12C351 3 429 48 483 105C543 168 570 242 570 304ZM482 289C482 161 380 33 304 33C278 33 248 51 233 69L303 396C326 400 352 403 369 403C428 403 482 380 482 289Z"/></g><g transform="matrix(.013,0,0,-0.013,11.342,0)"><path id="g117-91" d="M512 -3V55L134 254V256L512 456V514L75 281V230L512 -3Z"/></g><g transform="matrix(.013,0,0,-0.013,22.605,0)"><use xlink:href="#g113-49"/></g><g transform="matrix(.013,0,0,-0.013,28.845,0)"><path id="g113-47" d="M113 -12C146 -12 170 11 170 46C170 78 146 103 114 103S58 78 58 46C58 11 82 -12 113 -12Z"/></g><g transform="matrix(.013,0,0,-0.013,31.809,0)"><use xlink:href="#g113-49"/></g><g transform="matrix(.013,0,0,-0.013,38.049,0)"><path id="g113-54" d="M153 550H386L412 615L406 623H120L82 318C104 327 142 338 184 338C294 338 347 275 347 187C347 112 305 39 221 39C160 39 119 71 97 89C88 97 80 96 71 90C59 80 50 67 49 57C48 45 52 36 66 23C80 9 123 -12 169 -12C221 -11 288 15 342 59C403 109 431 165 431 225C431 308 366 395 238 395C212 395 165 379 127 364L153 550Z"/></g></svg>). The application of fluoride varnishes had some positive effects on preventing enamel erosion; however, the most effective agent was fluoride varnish with added casein phosphopeptide-amorphous calcium phosphate.

Sule Bayrak

Nuray Tuloglu

Huseyin Bicer

Emine Sen Tunc

Effect of Fluoride Varnish Containing CPP-ACP on Preventing Enamel Erosion

Low-pressure cold spraying is a newly developed technology with high application potential. The aim of this study was to investigate potential application of this technique for producing a new type of transparent conductive oxide films target. Cold spraying technique allows the manufacture of target directly on the backing plate; therefore the proposed sputtering target has a form of Sn+In<sub>2</sub>O<sub>3</sub> coating sprayed onto copper substrate. The microstructure and properties of the feedstock powder prepared using three various methods as well as the deposited ones by low-pressure cold spraying coatings were evaluated, compared, and analysed. Produced cermet Sn+In<sub>2</sub>O<sub>3</sub> targets were employed in first magnetron sputtering process to deposit preliminary, thin, transparent conducting oxide films onto the glass substrates. The resistivity of obtained preliminary films was measured and allows believing that fabrication of TCO (transparent conducting oxide) films using targets produced by cold spraying is possible in the future, after optimization of the deposition conditions.

M. Winnicki

A. Baszczuk

M. Rutkowska-Gorczyca

M. Jasiorski

A. Ma&#x142;achowska

W. Posadowski

Z. Znamirowski

A. Ambroziak

Microscopic Examination of Cold Spray Cermet Sn+In<sub>2</sub>O<sub>3</sub> Coatings for Sputtering Target Materials

About this journal

<p><em>Scanning</em> publishes international and interdisciplinary research focused on scanning electron, scanning probe, and scanning optical microscopies, and their advancement and applications.</p>


Journal profile

Meet the editorial board

<p>Chief Editor, Guosong Wu is a Professor at the College of Mechanics &amp; Materials in Hohai University.&nbsp;His research interests include surface engineering, corrosion science, metals and plasma related technologies.</p>


Editor spotlight

Submit your proposal

Do you think there is an emerging area of research that really needs to be highlighted? Or an existing research area that has been overlooked or would benefit from deeper investigation? Raise the profile of a research area by leading a Special Issue.

Special Issues

Author guidelines

Editorial board

Databases and indexing

title

Scanning publishes international and interdisciplinary research focused on scanning electron, scanning probe, and scanning optical microscopies, and their advancement and applications.

Scanning