Thermal Hydraulic Analysis Using GIS on Application of HTR to Thermal Recovery of Heavy Oil Reservoirs

Table 2

Basic configuration of injection.

	Injection with boiler/HTR-PM
Number of used boiler/HTR-PM reactor at same time	15/1
Number of injected wells at same time	30 (20–40)
Number of boilers	100
Number of wells	6000
Initial temperature of steam (°C)	318.05/566
Mass flow out of each boiler/HTR-PM (ton/day)	200–800/6500
Mass flow rate of water to each well (ton/day)	Around 200
Initial pressure of steam (MPa)	11/14.3
Initial dryness of steam	0.725/1
Average length of main steam pipeline (km)	0/7.5
Area of reference oil field (km^2)	20×20
Average length of branch steam pipeline (km)	0.8
Average distance from injection station to well head	0.2
Depth of typical well (m)	759.75