Analysis for Shear Behavior of SRC Deep Beams Based on Tests, Digital Image Correlation Technique, and Finite Elemental Simulation

Table 4

The shear capacity obtained by FEM.

Specimens	Specimen length (mm)		Width ratio	Height ratio	(MPa)	(%)	Stirrup spacing (mm)	Shear capacity (mm)
SDB-1	860	1.1	0.5	0.6	2.39	1.5	100	421 kN
SDB-2	1020	1.4	0.5	0.6	2.39	1.5	100	387 kN
SDB-3	1200	1.7	0.5	0.6	2.39	1.5	100	346 kN
SDB-4	1350	2	0.5	0.6	2.39	1.5	100	292 kN
SDB-5	1020	1.4	0.33	0.6	2.39	1.5	100	365 kN
SDB-6	1020	1.4	0.42	0.6	2.39	1.5	100	374 kN
SDB-7	1020	1.4	0.58	0.6	2.39	1.5	100	393 kN
SDB-8	1020	1.4	0.67	0.6	2.39	1.5	100	398 kN
SDB-9	1020	1.4	0.5	0.3	2.39	1.5	100	284 kN
SDB-10	1020	1.4	0.5	0.45	2.39	1.5	100	353 kN
SDB-11	1020	1.4	0.5	0.75	2.39	1.5	100	474 kN
SDB-12	1020	1.4	0.5	0.6	2.01	1.5	100	352 kN
SDB-13	1020	1.4	0.5	0.6	2.64	1.5	100	414 kN
SDB-14	1020	1.4	0.5	0.6	2.85	1.5	100	438 kN
SDB-15	1020	1.4	0.5	0.6	2.99	1.5	100	456 kN
SDB-16	1020	1.4	0.5	0.6	2.39	0.5	100	333 kN
SDB-17	1020	1.4	0.5	0.6	2.39	1	100	380 kN
SDB-18	1020	1.4	0.5	0.6	2.39	2	100	390 kN
SDB-19	1020	1.4	0.5	0.6	2.39	1.5	50	393 kN
SDB-20	1020	1.4	0.5	0.6	2.39	1.5	75	389 kN
SDB-21	1020	1.4	0.5	0.6	2.39	1.5	125	382 kN