Physicomechanical and Thermal Properties of Particle Board Produced Using Waste Ceramic Materials and Corncob

Table 3

ANOVA for the particleboard properties.

Sources	DF	MOE			MOR			Compressive strength
		SS	F value	value	SS	F value	value	SS	F value	value
Model	2	236.45	10.95	0.0239	2794.73	10.48	0.0257	17.30	28.65	0.0043
A	1	36.80	3.41	0.1386	484.72	3.64	0.1292	17.22	57.04	0.0016
B	1	7.82	0.67	0.0159	2.89	0.11	0.0623	0.0026	0.0244	0.3400
AB	1	191.83	18.49	0.0126	2307.11	17.33	0.00141	0.00779	0.2665	0.6329
Residual	4	43.19			533.33			1.21
		0.8455			0.8397			0.9348
Adj.		0.7683			0.7596			0.9021
Mean		35.00			119.04			15.79
SD		3.29			11.55			0.5495
AP		8.0484			7.8948			13.0813
CV %		9.39			9.70			3.48

DF: degree of freedom; SS: sum of squares; SD: standard deviation; : coefficient of determination; AP: adequate precision; Adj. : adjusted coefficient of determination; A = MCC, and B = WCT.