Design, Fabrication, and Characterization of 3D-Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces

<div>Images of the 20 × 8 mm 3D-print TPMS scaffolds, along with magnified images using an AmScope (Feasterville, PA) surgical microscope (5x): (a) diamond longitudinal-section; (b) diamond transverse-section; (c) gyroid longitudinal-section; (d) gyroid transverse-section; (e) modified gyroid longitudinal-section; (f) modified gyroid transverse-section.</div>

Advances in Polymer Technology

fig3

Figure 3

Figure 3: Design, Fabrication, and Characterization of 3D-Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces 