Research Article
Design, Fabrication, and Characterization of 3D-Printed Multiphase Scaffolds Based on Triply Periodic Minimal Surfaces
Table 1
Average mechanical data for controls and TPMS models.
| | E (Mpa) | Error (%) | E storage (Mpa) | Error (%) | E loss (Mpa) | Error (%) | G (Mpa) | Error (%) | G storage (Mpa) | Error (%) | G loss (Mpa) | Error (%) |
| Soft control | 1.37 | 7.8 | 1.15 | 6.84 | 0.79 | 22.4 | 0.36 | 4.5 | 0.29 | 3.63 | 0.21 | 6.17 | Medium control | 1.93 | 8.6 | 1.59 | 7.04 | 1.08 | 11.9 | 0.48 | 7.2 | 0.38 | 4.89 | 0.29 | 11.1 | Stiff control | 8.88 | 8.1 | 7.49 | 8.17 | 4.75 | 8.02 | 1.64 | 4.2 | 1.17 | 5.13 | 1.14 | 3.45 | Gyroid | 3.62 | 20.3 | 2.95 | 19.43 | 2.09 | 22.3 | 0.80 | 9.7 | 0.63 | 2.54 | 0.52 | 4.26 | Modified gyroid | 3.15 | 8.5 | 2.83 | 8.47 | 1.38 | 9.05 | 0.60 | 5.9 | 0.52 | 4.47 | 0.29 | 10.6 | Diamond | 5.48 | 15.7 | 4.39 | 15.86 | 3.28 | 15.7 | 1.06 | 1.2 | 0.78 | 1.48 | 0.72 | 1.04 |
|
|
Compression ( E) and shear ( G) complex, storage, and loss moduli for the control and TPMS models at 6 rad/s. |