Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al<sub>2</sub>O<sub>3</sub> + TiC)

<div>Material ratio curve for roughness profile, experiment 1-1 at <i>v</i> = 67 (m/min); <i>f</i> = 0.1 (mm/rot).</div>

Advances in Tribology

fig4

Figure 4

Figure 4: Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al<sub>2</sub>O<sub>3</sub> + TiC) 

Figure 4 | Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al2O3 + TiC) 