Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al<sub>2</sub>O<sub>3</sub> + TiC)

<div>Rmr (50% Rz) as a function of cutting speed <i>v</i> (m/min) and feed <i>f</i> (mm/rot), at <i>a</i> = 0.8 (mm) and <i>r</i> = 1.6 (mm).</div>

Advances in Tribology

fig9

Figure 9

Figure 9: Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al<sub>2</sub>O<sub>3</sub> + TiC) 

Figure 9 | Mathematical Modeling of the Bearing Ratio Curve Rmr (50% Rz), through Investigation of the Effect of Process Parameters in Hard Turning of Steel C55 (DIN) with Mixed Ceramics MC2 (Al2O3 + TiC) 