Research Article
Flexural Strength of Translucent Zirconia Materials Produced with Different Multilayer Technologies: An In Vitro Study
Table 2
Sintering parameters for the two multilayered materials used.
| | Materials used | Heating phases | Heating rate (°C/min) | Sintering temperature (°C) | Holding temperature (°C) | Holding time (min) | Cooling rate (°C/min) | Total sintering time |
| | IPS e.max® ZirCAD Prime | Phase I | 10 | 900 | 900 | 30 | 10 | 9 hr 50 min | | Phase II | 3.3 | 1,500 | 1,500 | 120 | 8.3 |
| | KATANA™ Multilayered Zirconia HTML | One phase | 10 | 1,550 | 1,550 | 120 | 10 | 7 hr |
|
|
