Research Article
Fabrication of Laser-Induced Graphene on Carbon Electrodes for Efficient Hydrogen Evolution Reaction
Figure 2
Laser-induced graphene (LIG) on (a) polyimide (PI) film and (g) carbon film fabricated without a chopper operation for a laser power of 5.4 W and (b–f) on a PI film and (h–l) carbon film (after pyrolysis) at laser powers of 5.4, 6.8, 8.2, 9.4, and 11.4 W fabricated with a chopper. Laser power was attenuated to 50 percent while patterning with chopper. Scale bar indicates the width of samples for LIG-CFs. Laser patterning areas on the PI film were identical ( mm2).
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |
(g) |
(h) |
(i) |
(j) |
(k) |
(l) |