| | Adhesive | Batch no. | Composition | Phosphoric acid gel | Application mode | Manufacturer |
| | ExciTE F DSC (EXC) | V49576 | HEMA, dimethacrylate, phosphonic acid acrylate, highly dispersed silicone dioxide, initiators, stabilizers, and potassium fluoride in an alcohol solution. | Total Etch (37 wt.% phosphoric acid gel) | ExciTE F DSC was applied with light brushing motion for 15 seconds and then air dried for 5 seconds and dispersed to a thin layer with a weak stream of air. | Ivoclar Vivadent AG, Schaan/Liechte nstein | | ENA Bond (ENA) | 2019010066 | Modified acrylate acid, polyacrylate acid, methacrylate, ethyl alcohol, catalysts, and stabilizers. | Ena Etch (37 wt.% phosphoric acid gel) | EnaBond was applied on the dentin surface, following the wet technique, with a microbrush, gently rubbed for 20–30 s, then distributed with an air spray for at least 15 s at a distance of 10 cm to form a slightly shiny adhesive film. | Micerium, Avegno, Genova, Italy | | Scotchbond Universal (UNI) | 6450964 | 10-MDP, HEMA, silane, dimethacrylate resins, Vitrebond copolymer, filler, ethanol, water, and initiators | Scotchbond Universal Etchant (32 wt. % phosphoric acid gel) | Scotchbond Universal was applied, following the wet technique, to the prepared dentin surface and scrubbed in for 20 seconds, and then gently air dried for approximately 5 seconds to evaporate the solvent. | 3M Oral Care, Seefeld, Germany |
|
|
